TURNER 1ST YEAR MCQ SET 01

0%
7 votes, 3.3 avg
213
Created by admin

TURNER

TURNER 1st YEAR MCQ set 01

1 / 50

Category: TURNER 1st YEAR

2 / 50

Category: TURNER 1st YEAR

What is the name of operation?

3 / 50

Category: TURNER 1st YEAR

Which angle is provided on the metric screw thread micrometer anvil?

4 / 50

Category: TURNER 1st YEAR

What is the purpose of using taper parallels in thread measurement?

5 / 50

Category: TURNER 1st YEAR

Calculate the change gears necessary to cut a thread of 7/16” lead on a lathe with a lead screw of 4TPI?

6 / 50

Category: TURNER 1st YEAR

What is the reason for using ACME thread in lathe lead screw?

7 / 50

Category: TURNER 1st YEAR

What is the name of the lathe accessory?

8 / 50

Category: TURNER 1st YEAR

Calculate the driven gear to cut 1.5mm pitch thread on a job using a lathe having lead screw of 4mm pitch with driver gear 30 teeth?

9 / 50

Category: TURNER 1st YEAR

10 / 50

Category: TURNER 1st YEAR

Calculate the change gear required to cut 4mm pitch thread in a lathe having lead screw of 4mm (lathe stud gear (driver has 50 teeth)

11 / 50

Category: TURNER 1st YEAR

What is the name of screw thread element marked as ‘X’?

12 / 50

Category: TURNER 1st YEAR

Which instrument has this type of measuirng anvils ?

13 / 50

Category: TURNER 1st YEAR

What is the formula for finding the depth of a BIS metric thread?

14 / 50

Category: TURNER 1st YEAR

Which is the element of thread?

 

15 / 50

Category: TURNER 1st YEAR

What is the name of lathe accessory?

16 / 50

Category: TURNER 1st YEAR

What is the use of thread?

17 / 50

Category: TURNER 1st YEAR

Which one is the example for transmission of motion using thread ?

18 / 50

Category: TURNER 1st YEAR

Which formula is used to find root width of a buttress thread?

19 / 50

Category: TURNER 1st YEAR

What is α in the formula     to calculate the lead of screw thread?

20 / 50

Category: TURNER 1st YEAR

What is thread element that determine the direction of rotation on screw thread?

21 / 50

Category: TURNER 1st YEAR

What will happen if threading tool is set below centre height?

22 / 50

Category: TURNER 1st YEAR

What is the tool life index of cemented carbide tool for turning high carbon steel?

23 / 50

Category: TURNER 1st YEAR

What is shown in the below figure?

24 / 50

Category: TURNER 1st YEAR

What is the name of the item marked as “x” in thread measurement?

25 / 50

Category: TURNER 1st YEAR

Which device uses buttress thread?

26 / 50

Category: TURNER 1st YEAR

What is the name of thread producing method by cold forging and by plastic deformation?

27 / 50

Category: TURNER 1st YEAR

What is the depth of ACME thread of 1” major diameter 6TPI?

28 / 50

Category: TURNER 1st YEAR

Which equation is used to calculate tool life?

A.

B.

C.

D.

29 / 50

Category: TURNER 1st YEAR

What is the gear marked as ‘x’?

30 / 50

Category: TURNER 1st YEAR

Which is the commonly used method to produce thread on nut?

31 / 50

Category: TURNER 1st YEAR

What is the value of tool life index for cutting cast iron by cemented carbide tool?

32 / 50

Category: TURNER 1st YEAR

What is the minor diameter of Trapezoidal screw thread Tr 40 x 7 depth clearance of 0.01 mm?

33 / 50

Category: TURNER 1st YEAR

Which angle is ground on ACME threading tool?

34 / 50

Category: TURNER 1st YEAR

What is the depth of cut for 10TPI BSW thread?

35 / 50

Category: TURNER 1st YEAR

What is calculated by formula 0.75 x pitch?

36 / 50

Category: TURNER 1st YEAR

Which is the type gear train?

37 / 50

Category: TURNER 1st YEAR

What is the name of tool?

38 / 50

Category: TURNER 1st YEAR

What is the core dia of square thread 62 x 10 mm pitch?

39 / 50

Category: TURNER 1st YEAR

What is measured on internal thread?

40 / 50

Category: TURNER 1st YEAR

What is the name of tool?

41 / 50

Category: TURNER 1st YEAR

How many teeth are in translating gear for cutting metric thread on British lathe?

42 / 50

Category: TURNER 1st YEAR

What is the use of BSW thread?

43 / 50

Category: TURNER 1st YEAR

Calculate the driven gear to cut 2mm pitch on a job using a lathe having lead screw of 4mm pitch with driven gear 50 teeth?

44 / 50

Category: TURNER 1st YEAR

What is the relationship between pitch and depth of a buttress thread?

45 / 50

Category: TURNER 1st YEAR

Which is the method of thread measurement?

46 / 50

Category: TURNER 1st YEAR

How much times the spindle rotate the lead screw to cut 3 mm pitch thread in a 12 mm pitch lead screw?

47 / 50

Category: TURNER 1st YEAR

What is the formula to find out core diameter of external thread by using prisms and micrometer?

48 / 50

Category: TURNER 1st YEAR

What is the relationship between pitch and depth of a square thread?

49 / 50

Category: TURNER 1st YEAR

Calculate the width of flat of buttress thread 6 mm pitch?

50 / 50

Category: TURNER 1st YEAR

Calculate the change gear (driver gear) if driven gear has 120 teeth to cut 3mm pitch on a job using lathe having 6 mm pitch lead screw?

Your score is

The average score is 34%

0%

  1. RATE THIS QUIZ IF U LIKE

THANKS

10 thoughts on “TURNER 1ST YEAR MCQ SET 01”

Leave a Reply

Your email address will not be published. Required fields are marked *